Getting Started
Coil installation and powering on
- Loosen both screws on the top door with a small Phillips or flat-head screwdriver (do not remove them, just loosen).
- Insert the coil, making sure the center post goes into the right terminal and the coil is seated properly.
- Gently tighten the screws to secure the coil (do not overtighten).
- Press the button 5 times to turn the device on.
- Once powered on, the Bubblr is ready to use.
- Load, Press and Enjoy
Each Bubblr is tested prior to shipping, but battery may need to be charged before your first puff.
How -To
- Loosely fill the bowl to the top. Avoid packing too tightly, since airflow through the bowl is important for performance.
- Hold the button for roughly six seconds to begin heating.
- Watch for a visual cue that the device is ready—either visible smoke or the glow of the coil through the hole in the top door.
- While inhaling, keep the button held to maintain heat through the draw, then release it when the pull is complete.
- Repeat the process as needed until the bowl is finished.